Page Content

ENGINEERING - CIVIL

College of Engineering and Computer Science

• BACHELOR OF SCIENCE
• MASTER OF SCIENCE
• CERTIFICATES
• CAREER POSSIBILITIES
• FACULTY
• CONTACT
• COMPLETE COURSE LISTING

PROGRAM DESCRIPTION

Civil Engineering involves the application of scientific principles and knowledge of mathematics and computers to the planning, analysis, design, and construction of all types of private and public works. Reduction of air and water pollution, disposal of hazardous wastes, renewal of our old cities, planning and building of new communities, providing water, power, and high-speed ground transportation systems are the responsibilities of the civil engineer. It is a continual challenge to the civil engineer to provide these services efficiently by the construction of dams, buildings, bridges, tunnels, highways, airports, waterways, and waste handling facilities in harmony with the natural environment.

Because of the broad range of demands on the civil engineer's services, the undergraduate program is devoted to fundamental principles in mathematics; basic and engineering sciences; the spectrum of Civil Engineering practice in both analysis and design; and required courses in the humanities and the social sciences, so that engineers may better relate to the world and society they serve. The upper division program permits students to select 9 units (3 courses) of electives. Students may increase the breadth or depth of their knowledge in Civil Engineering by selecting these electives in several areas: environmental and water quality engineering, geotechnical engineering, structural engineering, transportation, and water resources engineering.

• MS: Environmental-Water Quality Engineering / Geotechnical Engineering / Structural Engineering / Transportation Engineering / Water Resources Engineering

Special Features

• The BSCE degree is accredited by the Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology, Inc. (EAC/ABET).
• A notable strength of the program is that most faculty are licensed professional engineers in California and have practical experience in industry. Thus, faculty bring an ability to relate theory to practice, and the program prepares the student for the profession as well as for advanced study.
• Emphasis is placed on design which is the definition and solution of engineering problems in a practical manner. Lower division and first semester junior year coursework provides the preparation for design in courses such as mathematics, physics, descriptive geometry, CAD, surveying, computer applications, and engineering economics. Design courses are available to students in their last three semesters including a senior design project course in the final semester.
• Class sizes are small providing for close interaction between students and faculty. This interaction is enhanced in laboratory courses which are an integral part of the curriculum.
• Computers are used in many courses and students have free access to computer laboratories.
• Communication skills and social and ethical responsibilities of professional practice are emphasized.
• Students are encouraged to participate in the Student Chapter of American Society of Civil Engineers and other student organizations, to develop organizational skills, and to interact with practicing civil engineers.
• Sacramento, the State Capital and the seat of county government, provides proximity to city, county, state and federal agencies, and many consulting firms with Civil Engineering departments. Thus, students have a unique environment to draw upon for semester projects, part-time or summer employment, and career opportunities.

Program Educational Objectives

The objectives of this program are to prepare graduates to:

• succeed in professional employment and/or graduate study in civil engineering;
• identify, analyze, and solve practical civil engineering problems;
• apply knowledge of Environmental, Geotechnical, Structural, Transportation, and Water Resources Engineering to design of Civil Engineering projects;
• communicate effectively with their peers, other professionals, decision makers, and the general public, in the conduct of their work; and
• practice Civil Engineering in a professionally responsible and ethical manner.

Academic Policies and Procedures

The following is a summary of policies and procedures specific to the Department of Civil Engineering. Other University policies and procedures in this catalog also apply to Civil Engineering majors. The Department will not hear petitions for deviation from articulated policies made by students who disregard catalog policy.

• Course Repeat Policy: Undergraduate engineering and Civil Engineering courses that are used to meet the Bachelor of Science in Civil Engineering degree requirements may be repeated only twice (for a total of three attempts). Grades of the second and third attempt will be averaged in grade point calculations.
• Reinstatement Policy: Students seeking reinstatement to the Civil Engineering major must complete a Reinstatement Petition (obtained at Admissions and Records). That petition will be reviewed by the Department Chair for approval or rejection.
  Note: The only basis for reinstatement is the expectation (supported by evidence provided by the student) that the student is now likely to progress towards the satisfactory completion of the Department's degree requirements in a timely manner.
• Minimum Grade Requirements: The purpose of this requirement is to assure that all Civil Engineering majors attain the minimum level of competency in all their coursework required for a Bachelor of Science Civil Engineering Degree.
  Courses that are prerequisites to courses taken for the major and CE 9, ENGR 115, ENGR 140, ENGL 1A, and ENGL 20 must be completed with a grade of "C-" or better.
  A minimum grade point average of 2.0 ("C") is required in the major courses applied to the degree.
  
• Incomplete Grades: Incomplete grades are issued only in accordance with University policy.  The student must be passing the course at the time an “Incomplete” is requested. An Incomplete Petition (obtained in the Department Office) must be submitted to the Department with the student’s and the course instructor’s signature. The Incomplete Petition must specify the work to be completed, the basis by which the student’s final grade will be determined, and the last date for completion of the incomplete work. An incomplete grade that is not cleared by the set date will lapse to an F grade.

UNDERGRADUATE PROGRAM

Students must satisfy the requirements of the Accreditation Board for Engineering and Technology (EAC/ABET). Consult the Civil Engineering Department Chair for specific General Education requirements.

Courses may be interchanged between semesters to accommodate the student's schedule, as long as prerequisites are observed. Working students should expect to take more than four years to complete the degree.

Requirements - Bachelor of Science Degree

Units required for Pre-Major: 46 plus GE courses
Units required for Major: 60 plus GE courses
Minimum total units for the BS: 138
NOTE: Additional units may be required to meet the Sacramento State foreign language requirement.

Courses in parentheses are prerequisites.

A. Required Lower Division Courses (Pre-Major)

First Semester Freshman Year (17 units)

(2)	CE 4	Engineering Graphics and CAD
(5)	CHEM 1A*	General Chemistry I (High school chemistry and college algebra; sufficient performance on the college algebra diagnostic test, or equivalent)
(4)	MATH 30*	Calculus I (MATH 29 or four years of high school mathematics which includes two years of algebra, one year of geometry, and one year of mathematical analysis; completion of ELM requirement and Pre-Calculus Diagnostic Test)
(3)	General Education course
(3)	General Education course

Second Semester Freshman Year (18 units)

(1)	CE 1A	Civil Engineering Seminar
(3)	CE 9	Plane and Topographic Surveying (MATH 26A or MATH 30; may be taken concurrently)
(4)	MATH 31*	Calculus II (MATH 30 or appropriate high school based AP credit)
(4)	PHYS 11A*	General Physics: Mechanics (MATH 30, MATH 31 or equivalent certificated high school courses. MATH 31 may be taken concurrently)
(3)	General Education course
(3)	General Education course

First Semester Sophomore Year (19 units)

(3)	ENGR 45	Engineering Materials (PHYS 11A, CHEM 1A; CHEM 1A may be taken concurrently)
(3)	MATH 45	Differential Equations for Science and Engineering (MATH 31)
(4)	PHYS 11C*	General Physics: Electricity and Magnetism, Modern Physics (MATH 31, PHYS 11A)
(3)	General Education course
(3)	General Education course
(3)	General Education course

Second Semester Sophomore Year (19 units)

(3)	ENGL 20	College Composition II (ENGL 1A or ENGL 2 or equivalent with a grade "C-" or better, sophomore standing must have completed 30 units prior to registration) OR
	ENGL 20T	College Composition II--Technical Communications (ENGL 1A with a grade "C-" or better, or equivalent)
(3)	ENGR 17	Introductory Circuit Analysis (PHYS 11C, MATH 45; either the math or physics may be taken concurrently, but not both)
(3)	ENGR 30	Analytic Mechanics: Statics (MATH 31, PHYS 11A or ENGR 6)
(4)	MATH 32	Calculus III (MATH 31)
(3)	General Education course
(3)	General Education course

*Indicates course which can also be used to meet University General Education requirements.

B. Required Upper Division Courses (Major)

Students must normally complete all lower division preparation before enrolling in upper division Engineering or Civil Engineering courses.

First Semester Junior Year (16 units)

(2)	CE 100	Engineering Geology (ENGR 112; may be taken concurrently)
(3)	CE 101	Computer Applications in Civil Engineering (CE 4, ENGR 30)
(3)	CE 146	Civil Engineering Practice (CE 1A, CE 101; both may be taken concurrently)
(3)	ENGR 110	Analytic Mechanics: Dynamics (ENGR 30, MATH 32, MATH 45)
(3)	ENGR 112	Mechanics of Materials (ENGR 30, ENGR 45, MATH 45)
(2)	ENGR 115	Statistics for Engineers (MATH 31, may be taken concurrently)

Second Semester Junior Year (16 units)

(1)	CE 113	Structural Laboratory (ENGR 112, CE 101)
(3)	CE 161	Theory of Structures I (CE 1A, CE 101, CE 146, ENGR 112, MATH 32; CE 146 may be taken concurrently)
(4)	CE 171A	Soil Mechanics (CE 1A, CE 100, CE 101, CE 146, ENGR 112; CE 146 may be taken concurrently)
(3)	ENGR 132	Fluid Mechanics (ENGR 110)
(2)	ENGR 140	Engineering Economics (ENGR 17, ENGR 30, or instructor permission)
(3)	General Education course

First Semester Senior Year (17 units)

(3)	CE 137	Water Resources Engineering (CE 1A, CE 101, CE 146, ENGR 115, ENGR 132, ENGR 140; CE 146 may be taken concurrently)
(4)	CE 147	Transportation Engineering (CE 1A, CE 9, CE 101, CE 146, ENGR 115, GWAR certification before Fall 09, or WPJ score of 70+, or at least a C- in ENGL ENGL 109M/W; CE 146 may be taken concurrently)
(3)	CE 164	Reinforced Concrete Design (CE 161, CE 113; CE 113 may be taken concurrently)
(4)	CE 170	Principles of Environmental Engineering (CE 1A, CE 101, CE 146, ENGR 115; GWAR certification before Fall 09, or WPJ score of 70+, or at least a C- in ENGL ENGL 109M/W; CE 146 may be taken concurrently)
(3)	ENGR 124	Thermodynamics (MATH 32, PHYS 11A, CHEM 1A)

Second Semester Senior Year (16 units)

(1)	CE 135	Hydraulics Laboratory (CE 101, CE 137, GWAR certification before Fall 09, or WPJ score of 70+, or at least a C- in ENGL ENGL 109M/W; CE 137 may be taken concurrently)
(3)	CE 190	Senior Project (To be taken in final semester or instructor permission)
(3)	CE elective+
(3)	CE elective+
(3)	CE elective+
(3)	General Education course

+ One CE elective is restricted to a design course.

C. Civil Engineering Electives

Electives are to be chosen from the following courses in consultation with a faculty advisor and must include at least one design elective (indicated by°).

CE 138	Hydrology (CE 137)
CE 139°	Open Channel Hydraulics (CE 137)
CE 148	Transportation Systems (CE 147, ENGR 140; GWAR certification before Fall 09, or WPJ score of 70+, or at least a C- in ENGL ENGL 109M/W or instructor permission)
CE 162	Theory of Structures II (CE 161)
CE 163°	Structural Design in Steel I (CE 161)
CE 165°	Structural Design in Steel II (CE 163)
CE 166	Seismic Behavior of Structures (CE 101, CE 161; ENGR 110)
CE 168°	Pre-stressed Concrete Design (CE 161, CE 164; CE 164 may be taken concurrently)
CE 169A°	Timber Design (CE 161)
CE 169B°	Reinforced Masonry Design (CE 161)
CE 171B°	Soil Mechanics and Foundation Engineering (CE 171A)
CE 172°	Design of Urban Water and Sewer Systems (CE 137)
CE 173°	Design of Water Quality Control Processes (CE 170, ENGR 132)
CE 181	Geoenvironmental Engineering (CE 171A or instructor permission)
CE 184	Introduction to Earthquake Engineering (CE 161, CE 171A)

° Indicates a design elective.
Note: Other electives, such as a CE 196 series course or CE 199E may be chosen with the approval of a faculty advisor and Department Chair.

CERTIFICATE PROGRAM

Wastewater Treatment Plant Operation Specialist

Operating and maintaining the infrastructure system and consistently meeting those public health and environmental objectives are the operators of wastewater treatment plants and wastewater collection systems. The Wastewater Treatment Plant Operator Certificate program is designed to provide students with the technical, scientific, and application background to obtain licensure and the knowledge, skills, and abilities to completely work in the wastewater treatment industry. The Certificate is offered by the College of Business Administration and is administered by the Sacramento State College of Continuing Education.

COOPERATIVE EDUCATION PROGRAM (Work Experience)

The Department of Civil Engineering encourages eligible students to participate in the Cooperative Education Program (Co-op). Eligibility requirements are completion of the pre-major and the first semester junior year with a minimum GPA of 2.5. The program provides alternate periods of University study and major-related, paid, off-campus work experience in private industry, or government. The experience will enhance the student's employment prospects upon graduation. Participants in this program will complete the equivalent of one or two six-month work periods in their junior year and/or their senior year. Students must enroll in the appropriate Professional Practice course (CE 195A) and are awarded a Certificate on satisfactory completion of the Co-op. However, the credits for this course do not replace the curricular requirements of the BSCE degree. Students interested in the Cooperative Education Program should apply in the satellite office in Riverside Hall 2004 or the main office in Lassen Hall 2008. For information call (916) 278-7234.

GRADUATE PROGRAMS

Civil Engineering encompasses a broad range of professional activities. The four years of undergraduate preparation for the Bachelor of Science degree are devoted to fundamental analytical principles and basic design applications. For technical competence in specialized areas and continued effectiveness on the job, graduate study is becoming increasingly necessary.

The Civil Engineering Department offers a graduate program of study leading to a Master of Science degree in Civil Engineering in the following areas of concentration:

• Environmental/Water Quality Engineering - water quality analysis and management, water, and waste treatment;
• Geotechnical Engineering - properties and behavior of soil and their application to design of foundation, retaining structures, earth dams and slopes, soil improvement and ground stabilization, geosynthetics inclusions, and soil dynamics, and earthquake engineering;
• Structural Engineering - earthquake resistant steel and concrete design applied to buildings and bridges, structural dynamics, structural mechanics, and finite element methods;
• Transportation Engineering - Transportation engineering and planning, traffic flow theory, and system management applicable to all modes with emphasis on highway and multimodal transportation; interdisciplinary study with other areas of Civil Engineering as well as with non-engineering areas (e.g., Environmental Studies, Geography, Public Policy & Administration, and Business Administration) may also be arranged; and
• Water Resources Engineering - advanced hydraulics and modern hydrologic techniques, flood forecasting, groundwater flow modeling, water resources management, and policy formulation.

Each area of concentration consists of a set of core courses, a choice of electives, and culminating requirements; all selected by the student and approved by an advisor. Practicing engineers who do not have a degree objective may choose to enroll in selected courses as part of a continuing education program.

Graduate students can also elect an emphasis in Engineering Management by taking elective courses in the College of Business Administration. Graduate students who are interested in this option can select up to 9 units of foundation courses and/or graduate business classes (refer to College of Business Administration catalog for listing of courses). Individual programs can be tailored with a faculty advisor.

Graduate brochures specifically describing the program in each area are available in the Department Office. Some graduate assistantships are available to qualified students. Application forms for these can be obtained from the Department or from the Office of Graduate Studies, River Front Center 206, (916) 278-6470.

Admission Requirements

Admission as a classified graduate student in Civil Engineering requires:

• an undergraduate degree in Civil Engineering; and
• a minimum 2.8 GPA both overall and in upper division engineering courses.

In addition, the merit of past academic endeavor, potential for future study, and professional goals may also be considered for granting admission.

Applicants who have deficiencies in admission requirements that can be removed by specified additional preparation may be admitted with conditionally classified graduate status. Any deficiencies will be noted on a written response to the student's admission application.

Students with a baccalaureate degree in engineering majors other than Civil Engineering (e.g., Electrical and Electronic, Industrial, Mechanical, or Surveying) or in other non-engineering scientific disciplines (e.g., Mathematics, Physics, or Geology) who wish to pursue the graduate program in Civil Engineering may be considered on an individual basis. Such students may be admitted as conditionally classified students and will be required to complete a specifically designed list of undergraduate prerequisite courses in engineering and/or mathematics, physics, and chemistry to correct undergraduate deficiencies. Such a student must have an approved study program on file with the Department while undertaking this qualifying work. Upon completion of these courses with a GPA of 2.8 or better, the student may apply for classified graduate status in Civil Engineering.

Admission Procedures

Applications may be accepted as long as room for new students exists. However, students are strongly urged to apply by April 1 for the following fall or October 1 for the following spring, in order to allow time for registration deadlines. All prospective graduate students, including Sacramento State graduates, must file the following with the Office of Graduate Studies:

• an online application for admission; and
• two sets of official transcripts from all colleges and universities attended, other than Sacramento State.

Approximately six weeks after receipt of all items listed above, a decision regarding admission will be mailed to the applicant. After being admitted, students must meet with an advisor and complete a Graduate Student Advising Form (obtainable in the Civil Engineering Department). This advising form must be kept current and on file in the Department Office.

Advancement to Candidacy

Each student must file an application for Advancement to Candidacy, indicating a proposed program of graduate study. This procedure should begin as soon as the graduate student has:

• removed any deficiencies in admission requirements;
• obtained classified graduate status;
• completed at least 12 units in the graduate program with a minimum 3.0 GPA, including at least three courses at the 200-level;
• taken the Writing Placement for Graduate Students (WPG) or taken a Graduate Writing Intensive (GWI) course in their discipline within the first two semesters of coursework at California State University, Sacramento or secured approval for a WPG waiver; and
• selected and obtained approval for a culminating requirement (Plan A, B, or C).

Advancement to Candidacy forms are available in the Department and in the Office of Graduate Studies. The student fills out the form after planning a degree program in consultation with his or her faculty advisor. The completed form is then approved by the Graduate Coordinator of the Department and submitted to the Office of Graduate Studies.

All graduate degree programs are subject to general University requirements for graduate degrees, explained in the Graduate Studies section of this catalog.

Requirements - Master of Science Degree

Units required for the MS: 30 - Includes research or independent study and units required in area of concentration (see below)
Minimum GPA: 3.0

Courses in parentheses are prerequisites.

A. Required coursework (18 units)

Core Courses: 15 units are required as outlined in the Core Courses section below.

Mathematics/Statistics: Select one of the following with advisor approval:
	ENGR 201	Engineering Analysis I (MATH 45)
	ENGR 202	Engineering Analysis II (MATH 45)
	ENGR 203	Engineering Statistics (ENGR 115 or equivalent)
B. Elective Courses (6-9 units)
Elective courses (including CE 299) selected with prior approval of the student's faculty advisor in the area of interest. In addition to 200-level courses, these may also include the technical electives (but not the required courses) from the undergraduate curriculum. Not more than 3 units of CE 299 may be taken without prior approval of the Graduate Coordinator. Students who are interested in emphasizing Engineering Management may select 9 units of elective courses from the College of Business Administration (refer to foundation courses and/or graduate courses offered by the College of Business Administration). Under this option students should work with a faculty advisor to develop a plan for the management elective courses.

C. Culminating Requirement (3-6 units)

Choose one of the following CE 500 requirements:

Plan A: Master's Thesis (3-6 units) Approval by the faculty thesis/project advisor and by a second faculty or an expert in the area of study is required. A presentation is also required. The thesis or project must comply with University standards for format and is filed in the University Library.

Plan B: Master's Project (3-6 units) See Plan A requirements.

Plan C: Directed Study (3 units) and Comprehensive Examination (0 units). Approval of one faculty member is required for Directed Study. The comprehensive examination is administered by a committee of three faculty members.

Core Courses:

Units required: 15 -- A minimum of 12 units must be taken from one of the following five areas of specialization. Up to 3 units can be satisfied by 200 level coursework (not including CE 299) outside the chosen area of specialization.

Environmental/Water Quality Engineering

(3)	CE 250	Systems Analysis of Resources Development (Graduate status or instructor permission)
(3)	CE 252A	Environmental Quality Processes I (CE 170 or equivalent)
(3)	CE 252B	Environmental Quality Processes II (CE 170 or equivalent, CE 252A recommended, or instructor permission)
(3)	CE 252C	Environmental Quality Processes III (CE 170 or equivalent; CE 252A recommended)
(3)	CE 254	Water Quality Management (CE 170 or equivalent; CE 252A recommended, or instructor permission)
(3)	CE 255	Transport of Chemicals in Soil Systems (MATH 45, graduate status)
(3)	CE 276	Groundwater Hydrology (CE 137 or instructor permission)

Geotechnical Engineering

(3)	CE 280A	Advanced Soil Mechanics and Foundation Engineering I (CE 171A or equivalent)
(3)	CE 280B	Advanced Soil Mechanics and Foundation Engineering II (CE 171A or equivalent)
(2)	CE 280C	Advanced Soil Mechanics Laboratory (CE 280A; Corequisite: CE 280B)
(3)	CE 283	Ground Modification Engineering (CE 171A, or equivalent)
(3)	CE 284	Soil Dynamics and Earthquake Engineering (CE 171A or equivalent)
(3)	CE 285	Geosynthetics I (CE 171A or instructor permission)
(3)	CE 286	Geosynthetics II (CE 171A or instructor permission)

Structural Engineering

(3)	CE 231A	Computer Methods of Structural Analysis I (CE 161)
(3)	CE 231B	Computer Methods of Structural Analysis II (CE 231A or instructor permission)
(3)	CE 232	Stability of Structures (CE 163 or CE 164 or instructor permission)
(3)	CE 234	Dynamics and Earthquake Response of Structures (Knowledge of the stiffness method of structural analysis)
(3)	CE 266	Advanced Design in Reinforced Concrete (CE 161, CE 163, CE 164)
(3)	CE 267	Structural Systems for Buildings (CE 232 or instructor permission)

Transportation Engineering

(3)	CE 261	Transportation Planning (CE 148 or instructor permission)
(3)	CE 262	Advanced Transportation Facility Design (CE 147 or instructor permission)
(3)	CE 263	Traffic Flow Theory (CE 147 or CE 148; ENGR 203 or instructor permission)
(3)	CE 265	Analysis and Control of Traffic Systems (CE 147 or CE 148; CE 263 or instructor permission)
(3)	CE 285	Geosynthetics I (CE 171A or instructor permission)

Water Resources Engineering

(3)	CE 250	Systems Analysis of Resources Development (Graduate status or instructor permission)
(3)	CE 251	Water Resources Planning (CE 250 or instructor permission)
(3)	CE 271	Modern Hydrologic Techniques (CE 137 or CE 138 and ENGR 203, or instructor permission)
(3)	CE 272	Advanced Engineering Hydraulics (CE 137 or equivalent)
(3)	CE 274	Hydrologic Modeling (CE 272 or equivalent; instructor permission)
(3)	CE 276	Groundwater Hydrology (CE 137 or instructor permission)

Requirements - Certificates

The graduate certificate program in Civil Engineering is designed to recognize students who have completed core graduate courses in a specialty area in Civil Engineering. This program meets the need of professional engineers that are interested in sharpening their skills in their specialty area. The certificate program is available to matriculated students in the Civil Engineering Graduate Program. A grade point average of 3.0 must be attained for all courses taken in the program. Certificates in the following areas are offered:

Environmental Engineering:

Geo-Environmental Certificate

(3)	CE 181	Geoenvironmental Engineering (CE 171A or instructor permission)
(3)	CE 252A	Environmental Quality Processes I (CE 170 or equivalent)
(3)	CE 255	Transport of Chemicals in Soil Systems (MATH 45, graduate status)
(3)	ENGR 203	Engineering Statistics (ENGR 115 or equivalent)

Treatment Systems Certificate

(3)	CE 252A	Environmental Quality Processes I (CE 170 or equivalent)
(3)	CE 252B	Environmental Quality Processes II (CE 170 or equivalent; CE 252A recommended, or instructor permission)
(3)	CE 252C	Environmental Quality Processes III (CE 170 or equivalent; CE 252A recommended, or instructor permission)
(3)	ENGR 203	Engineering Statistics (ENGR 115 or equivalent)

Water Quality Certificate

(3)	CE 250	Systems Analysis of Resources Development (Graduate status or instructor permission)
(3)	CE 252A	Environmental Quality Processes I (CE 170 or equivalent)
(3)	CE 254	Water Quality Management (CE 170 or equivalent; CE 252A recommended, or instructor permission)
(3)	ENGR 203	Engineering Statistics (ENGR 115 or equivalent)

Geotechnical Engineering:

Foundation Engineering Certificate

(3)	CE 280A	Advanced Soil Mechanics and Foundation Engineering I (CE 171A or equivalent)
(3)	CE 280B	Advanced Soil Mechanics and Foundation Engineering II (CE 171A or equivalent)
(2)	CE 280C	Advanced Soil Mechanics Laboratory (CE 280A; Corequisite: CE 280B)
(3)	CE 284	Soil Dynamics and Earthquake Engineering (CE 171A or equivalent)

Ground Modification Certificate

(3)	CE 283	Ground Modification Engineering (CE 171A or equivalent)
(3)	CE 285	Geosynthetics I (CE 171A or instructor permission)
(3)	CE 286	Geosynthetics II (CE 171A or instructor permission)
(3)	ENGR 203	Engineering Statistics (ENGR 115 or equivalent)

Structural Engineering:

Structural Engineering Certificate

(3)	CE 231A	Computer Methods of Structural Analysis I (CE 161)
(3)	CE 232	Stability of Structures (CE 163 or CE 164 or instructor permission)
(3)	CE 234	Dynamics and Earthquake Response of Structures (Knowledge of the stiffness method of structural analysis)
(3)	CE 266	Advanced Design in Reinforced Concrete (CE 161, CE 163, CE 164)

Transportation Engineering:

Transportation Planning Certificate

(3)	CE 250	Systems Analysis of Resources Development (Graduate status or instructor permission)
(3)	CE 261	Transportation Planning (CE 148 or instructor permission)
(3)	CE 262	Advanced Transportation Facility Design (CE 147 or instructor permission)
(3)	ENGR 203	Engineering Statistics (ENGR 115 or equivalent)

Transportation/Traffic Engineering Certificate

(3)	CE 250	Systems Analysis of Resources Development (Graduate status or instructor permission)
(3)	CE 263	Traffic Flow Theory (CE 147 or CE 148; ENGR 203 or instructor permission)
(3)	CE 265	Analysis and Control of Traffic Systems (CE 147 or CE 148; CE 263 or instructor permission)
(3)	ENGR 203	Engineering Statistics (ENGR 115 or equivalent)

Water Resources Engineering:

Engineering Hydraulics Certificate

(3)	CE 272	Advanced Engineering Hydraulics (CE 137 or equivalent)
(3)	CE 274	Hydrologic Modeling (CE 272 or equivalent; instructor permission)
(3)	CE 276	Groundwater Hydrology (CE 137 or instructor permission)
(3)	ENGR 203	Engineering Statistics (ENGR 115 or equivalent)

Water Resources Planning Certificate

(3)	CE 250	Systems Analysis of Resources Development (Graduate status or instructor permission)
(3)	CE 251	Water Resources Planning (CE 250 or instructor permission)
(3)	CE 271	Modern Hydrologic Techniques (CE 137 or CE 138 and ENGR 203 or instructor permission)
(3)	ENGR 203	Engineering Statistics (ENGR 115 or equivalent)

Career Possibilities

Bridge Engineer · Civil Engineer · Construction Engineer · Design Engineer · Environmental Engineer · Foundation Engineer · Geotechnical Engineer · Highway Engineer · Hydraulic Engineer · Hydrologic Engineer · Project Engineer · Public Works Engineer · Research Engineer · Sanitary Engineer · Soils Engineer · Structural Engineer · Traffic Engineer · Transportation Engineer · Urban Planner · Water Resources Engineer

COMPLETE COURSE LISTING | RETURN TO TOP|